Cited references

 

Arruda, E. and Boyce, M.C. (1992), J. Mech. Phys. Solids, 41, p.389.  

Ashby, M.F. and Jones, D.R.H., (2005), “Engineering Materials,” Butterworth-Heinemann. 

 

Bergstrom J.S., and Boyce M.C., (1998), J. Mech. Phys. Solids., 46, p.931.

Bryant M.D., and Keer L.M., (1982), J. Appl. Mech., 49, p.345.

 

Cai W., Arsenlis A., Weinberger C. R. and Bulatov V V, (2006), J. Mech. Phys. Solids, 54, p.561. 

Charalambides P.G., Cao H.C., Lund J. and Evans A.G., (1990), Mechanics of Materials, 8, p.269.

Choi S.T.,  Shin H., and Earmme, Y.Y., (2003), Int. J. Solids Structures, 40, p.1411.  

Clifton R.J., (1990), Applied Mechanics Reviews, 43, p.S9-S22.

Coker D., Needleman A., and Rosakis A., (2005), J. Mech. Phys. Solids, 53 p.884.

Comninou M. (1977), J. Appl.  Mech., 44, p.631.

 

Dieterich J.H., (1979), J. Geophys. Res., 84, p.2161.

 

Eshelby J.D., (1957), Proc. Roy. Soc. Lond., A241 p.376.

Eshelby J.D., (1959), Proc. Roy. Soc. Lond., A252, p.561.

 

Flanagan D.P. and Belytschko T., (1981), Int J. Num. Meth. in Eng., 17, p.679.

Freund L.B. and Suresh S., (2003), “Thin Film Materials,” C.U.P., Cambridge.

Frost H.J. and Ashby M.F., (1982), “Deformation Mechanism Maps,” Pergamon Press, N.Y.

 

Gearing B.P., Moon H.S., Anand L., (2001), Int. J. Plasticity, 17, p.237.

 

Hamilton, G.M., (1983), Proc I. Mech E., 197C, p.53.

He, M. and Hutchinson J.W., (1981), J. Appl. Mech., 48, p.830.

Hutchinson J.W., (1968), J. Mech. Phys. Solids, 16, p.13.

 

Johnson, K.L., (1985) “Contact Mechanics,” C.U.P. Cambridge.

 

Klopp R.W., Clifton R.J., Shawki T.W., (1985), Mechanics of Materials, 4, p.375.

Kreyzig, “Advanced Engineering Mathematics, (1998), Wiley, New York.

 

Leichti K.M.  Knauss W. (1982), Exp. Mech. 22 p.383.

Liu Y. and Mahadevan S., (2005), Int. J. Fatigue, 27, p.790.

 

Malvern L.E., (1969), “Introduction to the Mechanics of a Continuous Medium,” Prentice Hall, NJ.

Matthies G. and Strang H., (1979), Int J. Num. Meth. in Eng.,. 14, p.1613.  (369)

McCrum N.G., Buckley C.P., Bucknall C.B., (1988), “Principles of Polymer Engineering,” O.U.P., New York, p.112.

Mooney M., (1940), J. Appl. Phys., 11, p.582.

Murakami (1987),Stress intensity factors handbook,” Pergamon Press, New York.

 

Ogden, R. (1972), Proc. R. Soc. Lond., A326, p.565 , ibid A328 p.567.

Ortiz M., and Pandolfi A., (1999), Int. J. Num. Meth. in Eng., 44, p.1276.

 

Pierce D., Asaro R.J.  and Needleman A., (1983), Acta Metall., 31, p.1951.

Prakash V., (1998), Journal of Tribology, 120, p.27.

 

Quested, D.L.,  Pae, K.D.,  Sheinbein, J.L., Newman, B.A., (1981), J. Appl. Phys, 52, p.5977.

 

Rice J.R.,  Paris P.C. and Merkle J.G., (1973), “Progress in Flaw Growth and Fracture Toughness Testing,” ASTM STP 536., p.231.

Rice J.R. and Rosengren, (1968), J. Mech. Phys. Solids, 16, p.31.

Ruina A.L., (1983), J. Geophys. Res. 88, p.10359.

 

Sackfield A. and Hills D.A., (1983), J. Strain Anal. 18,  p.105.

Simmons G., and Wang H., (1970), “Single Crystal Elastic Constants and Calculated Aggregate Properties,” MIT Press.

 

Simo,  J. C., and Rifai, M.S., (1990), Int J. Num. Meth in Eng.  29, p.1595.

Simo,  J. C., and Armero, F., (1992), Int J. Num. Meth in Eng., 33, p.1413.

Sternberg E., (1954), Q. J. Appl. Mech., 11 p.393.

Suo Z. and Hutchinson J.W.,  (1989), Mat. Sci. & Eng. A107,  p.135.

 

Tada H., Paris P.C. and Irwin G.R., (2000), “The Stress Analysis of Cracks Handbook,” ASME; 3rd edition.

Tillmann K., Thust A. and Urban A., (2004), Microsc. Microanal. 10, p.185.

Timoshenko S.P. and Woinowsky-Krieger S., (1959), `Theory of Plates and Shells,’  McGraw-Hill.

Ting T.C.T. (1996), “Anisotropic Elasticity: Theory and Applications” O.U.P. New York.

Treloar L.R.G., (1948), Proc. Phys. Soc., 60, p.135.

Treloar L.R.G., (1944), Trans. Faraday Soc. 40, p.59.

 

Wood D.M., (1990), “Soil Behavior and Critical State Soil Mechanics,” C. U. P., Cambridge.

Wu P.D., Neale K. and Van der Giessen, E., (1996), Int. J. Plasticity, 12, p.1199.

 

Xu, X.P. and Needleman A., (1995), J Mech. Phys. Solids, 42 p.1397.